Donut Gasket with 76mm/3 inch Inside Diameter.  This is a TurboXS designed custom gasket that is used in several of our exhaust systems.  

Application Model Year: 2002-2005 WRX.  Please go to the Download Section for the to the Download Section for the Instruction Manual,...

Replacement 2 hole Gasket at the back of the W15-FP-1 (J Pipe) or Front section of the W15-FPC 78mm Hole Radius 96mm Bolt Hole Spacing...

Application Model Year: 2006-2011 WRX / 2007+ STI/LGT/FXT/BAJA; Outside of the US: 2006+ Top Feed Injector Vehicles only.  Please go to...

Replacement overflow bottle for the WS08 FMIC.

BOV-SML Nipple and O-ring

Model Year 2003-2006 350Z. Please go to the Download Section for the to the Download Section for the Instruction Manual, Firmware, base...

WS08-HW-1 hardware for STI front mount intercoolers

DTEC Firmware & Manuals: DTEC FC DTEC BC DTEC FCBC   Note: Flash FIRMWARE AT YOUR OWN RISK, You will most likely ruin your working...

Are the Silicone Couplers and T-bolt Clamps on your old TurboXS Front Mount Intercooler looking a bit old and busted?  Buy a complete...

The Bov-XS-Soft spring is used on applications that have low or light vacuum source cars. Recommend for vehicles with around - 8 inHg.