1 - Turbo Outlet Pipe2-  Drivers Side/Battery Pipe2a-  Drivers Side/Battery Pipe (06-07) 3-  Drivers Side U Bend3a-  Drivers Side U Bend...

2-Bolt High Temperature Exhaust Gasket (76mm/3" I.D.) 76mm Hole Diameter 105mm Bolt Hole Spacing This is the typical exhaust gasket for a...

The Genesis 2.0T Blow Off Valve Kit is a complete bolt on valve. Which allows you remove the factory bypass valve and replace it with our...

4-Bolt High Temperature Exhaust Gasket (76mm/3" I.D.).  This is a custom gasket designed for TurboXS exhausts systems on the 2002-2007...

To unleash the full potential of your Gencoupe's 2.0T Theta powerplant, you need to do two simple things: Let it breathe in easier and...

63mm ID; 2 Hole; 304 Stainless Steel Spacer Gasket.  This gasket is a "spacer gasket" for 2002-2007 Subaru WRX or ?2004-2007 Subaru WRX...

Donut Gasket with 63mm/2.5 inch Inside Diameter.  This is a TurboXS designed custom gasket that is used in several of our exhaust...

Donut Gasket with 76mm/3 inch Inside Diameter.  This is a TurboXS designed custom gasket that is used in several of our exhaust systems.  

The largest and best FMIC for your 2010-2012 Gencoupe!    Why do you need this: One of the main causes of inconsistent horsepower output...

Replacement 2 hole Gasket at the back of the W15-FP-1 (J Pipe) or Front section of the W15-FPC 78mm Hole Radius 96mm Bolt Hole Spacing...

The TurboXS kit mounts the blow off valve on the throttle body nicely. Stainless steel T bolt clamps and multi ply silcone used to keep a...

The Greddy Kit mounts the blow off valve on the throttle body nicely. Stainless steel T bolt clamps and multi ply silcone used to keep a...